“When all you have is a hammer, everything else looks like it needs a good solid whack in the head with a hammer.”
A hammer is a tool consisting of a long wooden handle attached to a shaped chunk of metal, that is capable of solving all problems. The chunk of metal is specially designed to perform the hammer's most important functions:
- Hitting things
- Gouging out eyes
The hammer is exceedingly good at its job.
A hammer is best wielded with a firm two-hand grip, dominant hand on top. Of course, if you feel the urge to hook the eye-gouging apparatus around two fingers and swing it wildly in all directions, with the hammer held tenuously in your hand by the power of centripetal force alone, feel free. No one will stop you. Indeed, everyone will be too afraid to stop you.
The proper way to handle a hammer varies depending on how the user wishes to operate it. Here is a simple guide:
Swing the hammer high above your head, scream maniacally, then forcefully slam the blunt end of the hammer down upon your intended target with every fiber of your being. Hernias are a possibility for heavier Norse hammers.
For maximum damage, strike the target squarely on top of the head. Squeamish users may want to steel themselves for the resulting spray of blood and gray matter. The well-trained will often try the Norse God approach and throw the hammer viciously at the opponent. Though effective and fun to watch, it is very difficult for even the veteran hammers user to have the hammer come back to them.
Direct the sharp "prongs" of the hammer into either of the target's eye sockets. Careful aim is needed in order to successfully gouge out the eye, rather than cause a simple puncture wound or compound fracture. The optimal point of entry for the hammer is just between the target's eye and eyebrow -- aiming down, of course. Ambitious practitioners can try for the more challenging "underhand" eye-gouge maneuver, in which the hammer is swung down behind the user and then back up, under the target's eye.
Do not be disappointed if the eye fails to exit its socket on your first try. The purpose of the attack is to blind and maim the subject; freeing the eye itself is merely a flourish of sorts. Another unrealistic expectation is hoping to see the eyeball burst. This rarely occurs, since the eyeball is very tough in construction.
“But a man can dream, can't he?”
Ha ha ha! Yes indeed, Mr. Wilde. A man can dream.
Here's some things you can do with a hammer, and when to do them:
- Hammer in the morning
- Hammer in the evening
- Hammer all over this land
- Hammer out warnings
- Hammer out danger
- Hammer out love between the brothers and the sisters
Hammer Dos and Don'ts
Some tips to keep in mind while using a hammer.
Abusing the hammer
There are those who would abuse the noble, maiming power of the hammer for more mundane ends, i.e., home repair or basic construction. Why someone would want to waste the power of such a beautifully destructive weapon on something so banal is difficult to understand, but it persists nonetheless. Hammer connoisseurs, however, may take pleasure in the knowledge that those who misuse the hammer often hit their thumbs when trying to pound in a nail. For those who've never experienced this type of accident, it really, really, really hurts. A lot.
The Life-Cycle of a Hammer
Contrary to popular belief, hammers are living things that deserve our love and respect, quite unlike those destined to receive its awesome destructive power.
Hammers are the end result of the combination of many diverse genetic materials, mainly that of trees and metallic deposits. The mating cycle begins when two people get into a hammer fight. During the vicious ritual, the genetic material contained in the hammers' pistils and stamen (see illustration) are mixed together and then fall to the soil. These bits of DNA combine with the blood of the victims to form the seeds of new trees and veins of metal deep underground.
Once the trees and metals have formed, they are harvested by human workers. The genetic information is then spliced together in the glorious love shack that is a hammer factory. The end product is then shipped out to bloodthirsty, hammer-fighting maniacs around the world. Thus the Bloody Circle of Life is begun anew.
Breeds of hammer
Hammers have been selectively bred for a variety of military applications. It would be unwise to attempt a conclusive list of hammers. However, a few notable varieties are worth mentioning.
- Warhammer: The warhammer is the ultimate hammering machine. Most war hammers are specially bred to have more metal ores in them. The hitty part and the eye gougy part are usually much larger. Also, metal ores often run down the length of the handle, and may extend all the way to the pistil or stamen. This makes for a much sturdier handle, which can better withstand the rigors of war.
- Ball-Peen Hammer: The ball peen hammer is a peculiar hammer with two hitty parts, and no eye-gougy part. One hitty part is rounded, and is called the "ball." The other hitty part is flat, and is called the "peen." Some suggest that the ball-peen hammer is the only hammer in which the male reproductive organs are fully developed.
- Claw Hammer: The Claw hammer is the traditional hammer, where the eye-gouging part is divided into two sections. It is understood that this bifurcation enhances the chance of actually removing the eye. "Carpenters" think claim that this bifurcated eye-gouging part is for pulling nails. Tests on how nails can be pulled with the eye-gouging part have produced some inconsistent results, although they can definitely mangle hands pretty good.
- Brick hammer: the brick hammer is constructed with the eye-gouging part un-bifurcated, and slightly less curled. Brick hammer eye-gouging parts are notably better at popping the eye than gouging them. Also, brick hammer eye gouging parts tend to be rather effective at trepanning the enemey, in the event that the user misses the eye. Some brick hammers have ore material extending down the handle for better reinforcement. The brick hammer is also useful for finger removal, such as in twenty questions.
- Rock Hammer: Rock hammers are made with a peculiar handle composed of metal ore and rubber instead of wood. Their eye gouging part is also designed with an un-bifurcated tip, but this one comes to a single pick like point. It has been suggested that this pick point actually is ideal for blinding the opponent.
- Sledge Hammer: This hammer is bred with two over-sized hitty parts, and an extra long handle. While the lack of eye-gougy parts seems to make removing eyes impossible this is not the case. The extra size of the hitty parts makes it possible to remove both eyes at the same time if you hit your opponent hard enough on the back of the head.
- Drywall hammer/Roofing Hammer: Abstrat features involving texture on the hitty part define these two classes of hammer in ways which only an expert can explain. However, both breeds of hammer have an axe-like head on the back side of the hammer, instead of an eye-gouging part. It is suggested that these are actually the result of hammer-axe cross breeding.
- Mallet: The mallet appears to be a hammer made without metal ores. The two hitty parts on top of the handle are often made of wood, plastic, or leather. Since they are usually not powerful enough to draw blood, there is some confusion as to how these weak hammer-like creatures breed at all.
The world of hammers is a rich and exciting place for the ultra-violent to explore. There are:
- Traditional hammers
- Hammerhead sharks
- Jumbo novelty hammers
- Meat tenderizers
- Ham radio
- Even squeaky toy hammers for the kids!
There are also an almost infinite variety of hammer types, styles, attacks, and criminal statutes to immerse yourself in. And it is so easy to take part. Simply pick up a hammer and pound anything that moves. It's fun, educational, and a great way to test the limits of the self-defense clause. Happy hammering!
NOTE: The content of this article is in no way related to MC Hammer